| Moodel | TR10 |
| Cabbirka Kelly Bar | |
| Dhexroorka ugu badan ee godka qodista | 800mm |
| Qoto dheer ee ugu badan | 12m |
| Dhexroorka ugu yar ee godka qodista | 400mm |
| Dhexroorka | Ø377mm |
| Jiis | |
| Nooca Jiisaska | Sany (miisaanka salka 3.5T) |
| Matoor | Yanmar 3TNV88 |
| Awoodda la qiimeeyay / rpm | 20.4KW / @2000rpm |
| Awoodda haanta shidaalka | 50L |
| Heerka buuqa ee Cinside of Cab | 69 (dB) |
| Heerka buuqa | 98(dB) |
| Nidaamka Haydarooliga | |
| Socodka bamka ugu weyn | 88L/daqiiqad |
| Cadaadiska shaqada ee nidaamka Haydarooliga | 280bar |
| Cadaadiska ugu badan ee nidaamka haydarooliga | 315bar |
| Awoodda taangiga haydarooliga | 40L |
| Mashiinka oo dhan | |
| Dhan | 1680mm |
| Dhererka mashiinka | 3516mm |
| Dhererka gaadiidka | 2736mm |
| Dhererka raadadka | 2155mm |
| Ballaca saxanka raadku waa | 300mm |
| Wadarta miisaanka (marka laga reebo baaldiga) | 6T |
| Xawaaraha safarka | 4.4Km/saacaddii |
| Jiidashada | 36.8kN |
| Madaxa Rotary | Matoorro labanlaab ah |
| Xuddunta ugu badan | 10kNm |
| Xawaaraha ugu badan ee ilaalinta | 26 rpm |
| Xawaaraha wareegista | 48rpm |
| winch ugu weyn | |
| Jiid xoogga lakabka 1aad | 20kN |
| Xawaaraha ugu badan ee qaadista iyo hoos u dhigista | 40m/daqiiqo |
| Dhexroorka xarigga silig | 12mm |
| winch kaaliye ah | |
| Jiid xoogga lakabka 1aad | 10kN |
| Xawaaraha ugu badan ee qaadista iyo hoos u dhigista | 40m/daqiiqo |
| Dhexroorka xarigga silig | 12mm |
| Dhululubo leexasho | Dhululubo leexasho |
| Xiisad | 60kN |
| Riixitaan | 50kN |
| Stroke | leexashada midig 550mm leexashada bidix 800mm |
| Ballaarinta tiirka | Dhululubo telescopic ah oo laba qaybood ah |
| Xoogga quudinta | 30KN |
| Xoogga kor u soo jiid | 35KN |
| Xagasha Lugaynta ee tiirka | Hore 4°Dabaq 2° Xagal Bidix iyo Midig 5° |
| Stroke | 1100mm |
| Qol madaxeed aad u hooseeya | Qol madaxeed aad u hooseeya |
| Dhererka shaqada ugu badan | 3950mm |
| Dhererka ugu yar ee shaqada | 3500mm |
| Fiiro gaar ah: Isbeddellada tignoolajiyada badeecadaha way isbeddeli karaan iyada oo aan la ogeysiin hore | |
Cabbirka Shaqada:
Cabbirka Gaadiidka:
S1: Ma waxaad tahay soo-saare, shirkad ganacsi mise dhinac saddexaad?
J1: Waxaan nahay warshad soo saarta. Warshadeennu waxay ku taal Gobolka Hebei oo u dhow caasimadda Beijing, 100km u jirta dekedda Tianjin. Waxaan sidoo kale leenahay shirkad ganacsi oo noo gaar ah.
S2: Ma isweydiinaysaa inaad aqbasho dalabaadka yaryar?
A2: Ha welwelin. Xor ayaad u tahay inaad nala soo xiriirto. Si aan u helno dalabyo badan oo aan macaamiisheenna u siino raaxo dheeraad ah, waxaan aqbalnaa dalabyo yaryar.
S3: Ma u diri kartaa alaab dalkayga?
A3: Dabcan, waan awoodnaa. Haddii aadan haysan qalab kuu gaar ah oo kuu gudbiya maraakiibta, waan ku caawin karnaa.
Q4: Ma ii samayn kartaa OEM?
A4: Waxaan aqbalnaa dhammaan dalabaadka OEM, kaliya nala soo xiriir oo i sii naqshaddaada. Waxaan ku siin doonnaa qiimo macquul ah waxaanan kuu sameyn doonnaa muunado sida ugu dhaqsaha badan.
Q5: Waa maxay shuruudaha lacag bixintaada?
A5: T/T, L/C AT SIGHT, 30% dhigaal hore, dheelitir 70% ka hor inta aan la rarin.
S6: Sideen u dalban karaa dalabka?
J6: Marka hore saxiix PI-ga, bixi deebaaji, ka dibna waxaan diyaarin doonnaa wax soo saarka. Kadib marka wax soo saarku dhammaado waxaad u baahan tahay inaad bixiso wixii harsan. Ugu dambeyntii waxaan soo rari doonnaa alaabta.
S7: Goormaan heli karaa qiimaha?
A7: Badanaa waxaan kuu soo sheegnaa 24 saacadood gudahood ka dib marka aan helno su'aashaada. Haddii aad aad ugu baahan tahay inaad hesho qiimaha, fadlan na soo wac ama noogu sheeg boostadaada, si aan u tixgelinno mudnaantaada su'aashaada.
Q8: Qiimahaagu ma yahay mid tartan badan?
A8: Kaliya alaab tayo wanaagsan leh ayaan bixinaa. Hubaal waxaan ku siin doonnaa qiimaha warshadda ugu fiican iyadoo lagu saleynayo badeecad iyo adeeg heer sare ah.
